As an Amazon Associate I earn from qualifying purchases.1. ARCELI
ARCELI MAX7219 Dot Matrix Module Red light For Microcontroller 4 In 1 Display with 5pin Line
ARCELI - A single module can drive a 8x8 dot matrix common cathode. Operating Voltage: 5V. Module with input and output interfaces, support for cascading multiple modules. Fixing screws with 64 holes with a diameter 3mm. Dimensions: 12. 8x12. 8x1. 3 cm.
2. Fafeicy
With High Quality, Dot Matrix Control Module, Support Cascading and Multi-Channel Scanning Loop, LED Single Chip Microcomputer Controller 4‑in‑1 MAX7219
Fafeicy - Multi-channel scanning loopthe dot matrix control modul includes an on chip B type BCD encoder, multi-channel scanning loop, segment word driver, and an 8 x 8 static RAM for storing each data. Only 3 io ports are needed to drive 1 dot matrix, no flicker when dot matrix display, support cascading.
It can also be connected to a bar graph display or 64 independent LEDs. Support cascadingmax7219 dot matrix control modul is an integrated serial input/output common cathode display driver.
Led displaythe max7219 dot matrix control module is connected to a microprocessor and an 8 digit 7 segment digital LED display. Featuresthe entire device includes a 150μa low power shutdown mode, a scan limit register that allows users to display 1bits of data, analog and digital brightness control, and a detection mode that allows all LEDs to emit light.
No need to rewrite all the display when updating, MAX7219 dot matrix control modulal allows the user to choose to encode or not to encode each data. Advantageeach data can be addressed.
| Brand | Fafeicy |
| Manufacturer | Fafeicy |
| Height | 0 cm (0 Inches) |
| Length | 0 cm (0 Inches) |
| Width | 0 cm (0 Inches) |
| Part Number | Fafeicyd0mqwgh2iv |
3. AITRIP
AITRIP 2pcs MAX7219 Dot Matrix Module Red Light for Arduino Microcontroller/Raspberry Pi 4 in 1 Display with 5pin Dupont Line
AITRIP - Equipped with input and output interfaces, support for multiple modules to cascade. Size of module: 12. 8x3. 3x1. 3cm5. 04x1. 3x051in. A single module can drive a 8x8 dot matrix common cathode. Operating Voltage: 5V. Fixing screws with 64 holes with a diameter 3mm.
4. YOUMILE
YOUMILE MAX7219 Dot led matrix MCU 8x32 control LED Display module Drive for Arduino Raspberry Pi 4 in 1
YOUMILE - A single module can drive a 8x8 dot matrix common cathode. Module with input and output interfaces, support for cascading multiple modules. Operating Voltage: 5V. Dimensions: 12. 8x3. 2x1. 3cm. Fixing screws with 64 holes with a diameter 3mm.
| Brand | YOUMILE |
| Manufacturer | Youmile |
| Part Number | TS-YM-322-lv |
| Model | TS-YM-322-lv |
5. YINETTECH
YINETTECH 4 in 1 MAX7219 Dot Matrix Module & 20cm 5-pin Line for Microcontroller
YINETTECH - This lets you display your information in a bold and bright way, taking your project to new levels. Connected a bar graph display or 64 independent LEDs. Durable, professional, with 5P Line.
This microcontroller compatible module provides a fully controllable 8x40 red LED Matrix. Max7219 is an integrated serial input & output common-cathode display driver, support for cascading multiple modules. It connects the microprocessor with 8 digits 7-segment digital LED display.
6. YOUMILE
YOUMILE MAX7219 Dot led matrix MCU 8x32 control LED Display module Drive for Arduino Raspberry Pi 4 in 1
YOUMILE - A single module can drive a 8x8 dot matrix common cathode. Module with input and output interfaces, support for cascading multiple modules. Dimensions: 12. 8x3. 2x1. 3cm. Operating Voltage: 5V. Fixing screws with 64 holes with a diameter 3mm.
| Brand | YOUMILE |
| Manufacturer | Youmile |
| Part Number | TS-YM-322-hone |
| Model | TS-YM-322-hone |
7. ALMOCN
ALMOCN MAX7219 Dot Matrix Display Module Single-Chip Control LED Module DIY Kit for Arduino with 5pin Line 2pcs
ALMOCN - Single module can drive a common cathode 8 * 8 dot matrix. Module size : 5 cm x 3. 2 cm wide X 1. 5 cm high. Holes with four screws, diameter 3mm, can be fixed by using our M3 studs. Module operating voltage : 5V. Modules with input and output interfaces, support for cascading multiple modules.
8. RLECS
RLECS MAX7219 Dot Matrix Module Microcontroller Module MCU Control DIY KIT for Arduino Raspberry Pi
RLECS - To drive a dot matrix needs only three IO ports. Module operating voltage: 5v; module Size: 50x32x13mm L x W x H. A single module can drive the an 8 x 8 dot matrix common cathodeo.
Support cascading. This product is an integrated serial input/output common-cathode display driver. Users are allowed to select each of the data code or not coded with the MAX7219. No flash matrix display.
| Brand | RLECS |
| Manufacturer | RLECS |
| Part Number | DMM-MAX7219-1set |
9. TECNOIOT
TECNOIOT 2pcs MAX7219 Dot Matrix Module Microcontroller 4 In One Display 5P Line Red Color
TECNOIOT - Packet contains2pcs x max7219 dot matrix module microcontroller 4 in one display with 5p line red color display fast and high quality delivery of buying in TECNOIOT║ Take 51 microcontroller as an example:VCC → 5V GND → GND DIN → P2. 2 cs → p2. 1 clk → p2. 0║. Design compact║a convenient four-wire serial interface can be connected to all general-purpose microprocessors.
Each data can be addressed without updating all displays when updating. Max7219 also allows users to choose to encode or not to encode each data. The entire device contains a 150μa low-power shutdown mode, analog and digital brightness control, a scan limit register allows the user to display 1-8 bits of data, and a detection mode that allows all LEDs to emit light.
Max7219max7219 is an integrated serial input/output common cathode display driver, it is connected to a microprocessor and an 8-digit 7-segment LED display.
It can also be connected to a bar graph display or 64 independent LEDs. It includes an on-chip b-type bcd encoder, segment word driver, multi-channel scanning loop, and an 8*8 static RAM for storing each data. Only one external register is used to set the segment current of each LED. Wiring instructions║the left side of the module is the input port, the output is connected to the input of the second module, only need to connect the input port to the CPU.
10. Yunseity
Dot Matrix Module,MAX7219 Chip LED Dot Matrix Module,8 x 8 Common Shade Red Dot Matrix Module,Control 64 LED Lights
Yunseity - Advantagehigh brightness, good Mixed color, resistant to humidity, heat and cold, antistatic, and corrosion. Led dedicated constant current control chipthe led dedicated constant current control chip, MAX7219 chip makes LED dot matrix drive possible, and supports access to the forPi B/B+.
High qualitymade of high quality materials, this module is rugged and long lasting. Easy to use8 x 8 common shade red dot matrix, pin number is easy to determine, easy to use. Easy to installthis module is small in size and compact in design, suitable for installation and easy to install.
| Brand | Yunseity |
| Manufacturer | Yunseity |
| Height | 3 cm (1.18 Inches) |
| Length | 11 cm (4.33 Inches) |
| Weight | 0.03 kg (0.07 Pounds) |
| Width | 8 cm (3.15 Inches) |
| Part Number | Yunseitye8gsyu9f7z6045 |
ARCELI - A single module can drive a 8x8 dot matrix common cathode. Operating Voltage: 5V. Module with input and output interfaces, support for cascading multiple modules. Fixing screws with 64 holes with a diameter 3mm. Dimensions: 12. 8x12. 8x1. 3 cm.
Fafeicy - Multi-channel scanning loopthe dot matrix control modul includes an on chip B type BCD encoder, multi-channel scanning loop, segment word driver, and an 8 x 8 static RAM for storing each data. Only 3 io ports are needed to drive 1 dot matrix, no flicker when dot matrix display, support cascading.
AITRIP - Equipped with input and output interfaces, support for multiple modules to cascade. Size of module: 12. 8x3. 3x1. 3cm5. 04x1. 3x051in. A single module can drive a 8x8 dot matrix common cathode. Operating Voltage: 5V. Fixing screws with 64 holes with a diameter 3mm.
YOUMILE - A single module can drive a 8x8 dot matrix common cathode. Module with input and output interfaces, support for cascading multiple modules. Operating Voltage: 5V. Dimensions: 12. 8x3. 2x1. 3cm. Fixing screws with 64 holes with a diameter 3mm.
YINETTECH - This lets you display your information in a bold and bright way, taking your project to new levels. Connected a bar graph display or 64 independent LEDs. Durable, professional, with 5P Line. This microcontroller compatible module provides a fully controllable 8x40 red LED Matrix. Max7219 is an integrated serial input & output common-cathode display driver, support for cascading multiple modules. It connects the microprocessor with 8 digits 7-segment digital LED display.
ALMOCN - Single module can drive a common cathode 8 * 8 dot matrix. Module size : 5 cm x 3. 2 cm wide X 1. 5 cm high. Holes with four screws, diameter 3mm, can be fixed by using our M3 studs. Module operating voltage : 5V. Modules with input and output interfaces, support for cascading multiple modules.
RLECS - To drive a dot matrix needs only three IO ports. Module operating voltage: 5v; module Size: 50x32x13mm L x W x H. A single module can drive the an 8 x 8 dot matrix common cathodeo. Support cascading. This product is an integrated serial input/output common-cathode display driver. Users are allowed to select each of the data code or not coded with the MAX7219. No flash matrix display.
TECNOIOT - Packet contains2pcs x max7219 dot matrix module microcontroller 4 in one display with 5p line red color display fast and high quality delivery of buying in TECNOIOT║ Take 51 microcontroller as an example:VCC → 5V GND → GND DIN → P2. 2 cs → p2. 1 clk → p2. 0║. Design compact║a convenient four-wire serial interface can be connected to all general-purpose microprocessors.
Yunseity - Advantagehigh brightness, good Mixed color, resistant to humidity, heat and cold, antistatic, and corrosion. Led dedicated constant current control chipthe led dedicated constant current control chip, MAX7219 chip makes LED dot matrix drive possible, and supports access to the forPi B/B+. High qualitymade of high quality materials, this module is rugged and long lasting. Easy to use8 x 8 common shade red dot matrix, pin number is easy to determine, easy to use. Easy to installthis module is small in size and compact in design, suitable for installation and easy to install.
