As an Amazon Associate I earn from qualifying purchases.1. ThreeBulls
ThreeBulls PWM Fan Hub, PC CPU Cooling 4 PIN/3PIN Fan Power Cable Hub Splitter Adapter Sleeved PWM Case Fan Splitter for 12V Desktop Computer Cooler Case Fans 1 to 5 Way 15.7 Inch
ThreeBulls - Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy. Excellent 4-pin pwm 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.
Package contents: 1 black 15. 7 inch 1-to-5 splitter fan power supply extension cables, male to female connector plug.
Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans. Widely compatible: the cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans.
2. Siganorpy
10 Port PC Chassis Fan Hub CPU Cooling HUB 12V 4 Pin Fan PWM Hub Molex Controller
Siganorpy - Red is expected to be a pass through for the cpu fan. Please note 4pin fan speed can be adjusted by temperature control. For both 4-pin and 3-pin fans. In the hub interfaces, the remaining nine conventional fan interfaces have the PWM function, the RED CPU interface is the CPU fan dedicated interface with speed detection function.
Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. If the chassis fan is configured in BIOS to run at 50%, then the speed is regulated by the speed for the "source" fan.
There is eva double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. You can connect to the CPU fan lead on the system board or the chassis fan lead. Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans.
Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis. The ten fans will spin at the same speed, you will have 10 fans at 50%. Since the mainboard can only receive one rotation speed signal, but no speed signal. 3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting. So, the hub has a power source fed from the computer power supply, that designated by the system for that fan.
| Brand | Siganorpy |
| Manufacturer | Kuesn |
| Part Number | Fan Hub 10 Port |
| Model | Fan Hub 10 Port |
3. One enjoy
Support 10 Computer CPU Fans Splitter PWM, PWM Fan Hub PC Case Fan Controller 4 Pin
One enjoy - Only the speed of the red port can be identified by the system. Stable sata power input: simple and stable. Only one saTA connection to the system. Pwm function: each port has its own pwm function and the fan speed can be adjusted at the same time.
Compact design can save space and make the wire more tidy. Easy to install: double-sided adhesive for easy installation and more stable standing in the surface. 10-port fan hub: supports 10 pwm 4 pin fans at the same time.
4. GeekerChip
4-pin connector for CPU fan PC fan hub, 4 PIN PWM fan splitter cable ， Suitable for computer PC fan cable, GeekerChip 4-pin PWM fan hub
GeekerChip - Compatibility: fan hub 4 pin compatible with all 12V CPU and case fans with 4 pin or 3 pin connector. Note: don’t exceed 12v 2a total output. Design: designed for the need to control many system fans.
Function: black 6 way PWM Splitter for Computer Fans. Please check your devices specification before installation. Convenience:1 female 4-pin connector + 6 Male 4-pin Connectors1 for 12V CPU and 5 for case fans.
5. ShiSheng
2Pcs 8 Way Cooling Fan Hub PC Fan Hub 12V 3-Pin 8 Way Motherboard Fan Splitter 8 Way Fan Speed Controller with SATA Port Support Magic Tape for Computer Extended Motherboard Interface
ShiSheng - The compact reinforcement can effectively save your space, has super adhesion, connect the fan cable to the 3 Pin cooling fan hub to help you manage the cables to the maximum and keep the chassis tidy. Easy to usethe 8 way cooling fan hub splitter is very easy to install. Safety materialthe 8 way motherboard fan splitter is made of high-quality PVC material, and corrosion resistance.
You can connect different numbers of fans depending on the fan startup voltage. This 8 way motherboard fan hub with sata interface only needs one power supply interface to connect 8 fans at the same time, there are more and more fan in the case, but also better manages the cables of the fans, which solves the problem of insufficient motherboard interfaces.
Excellent fan cable managementwith the frequent use of computers, but the noise and chaotic lines also bother everyone. Built-in double gluethe 8 way splitter cooler is fixed with thick glue, its can be firmly fixed in the chassis, and is not easy to fall off. The safe and environmentally friendly materials can ensure your safety in use, high hardness, which has the advantages of non-flammability, sturdiness and durability, and it can be used for a long time.
Three shift controlsthe 12v 8 way fan splitter hub has a speed control function, low-speed silent gearLOW, high-speed fast heat dissipation gearHIGH, which can manually adjust 3 gears, turn off the fan gearOFF, so you can manually shift the governor gear in different situations to meet your different needs. Its not only allows the computer to get good heat dissipation, keeping your case tidy. You need to connect the fan's cable interface to any pin of 8 way fan speed controller, and then connect the SATA to the SATA interface of your computer to supply power.
6. GeekerChip
1 Female and 6 Ports with 4 Pin, GeekerChip PC Fan Hub, 6 Pin PWM Fan Hub, for Computer Cooling Fans, CPU/Case Fan Splitter Cable
GeekerChip - Note: don’t exceed 12v 2a total output. Function: black 6 way PWM Splitter for Computer Fans. Please check your devices specification before installation. Design: designed for the need to control many system fans.
Compatibility: fan hub 4 pin compatible with all 12V CPU and case fans with 4 pin or 3 pin connector. Convenience:1 female 4-pin connector + 6 Male 4-pin Connectors1 for 12V CPU and 5 for case fans.
| Brand | GeekerChip |
| Manufacturer | GeekerChip |
| Weight | 0.5 kg (1.1 Pounds) |
| Part Number | ADP-FanHub-4Pin-6Way |
| Model | ADP-FanHub-4Pin-6Way-gc |
| Warranty | No Warranty |
7. Cuifati
4-Pin Computer CPU Fan Hub, PC CPU Cooling 4 PIN/3PIN Fan Power Cable Hub Multi Splitter Connector Cable Adapte for 12V Desktop Computer Cooler Case Fans 15 Inch
Cuifati - Black sleeved 4 way PWM splitter hub for computer fans. Designed for the need to control numerous system fans. Support pwm function, Speed control, satisfy your control needs. Capable of expanding one motherboard PWM fan header to support up to four fans. Compatible with 3-pin / 4-pin Fans.
| Brand | Cuifati |
| Manufacturer | Cuifati |
| Height | 0 cm (0 Inches) |
| Length | 0 cm (0 Inches) |
| Weight | 0.01 kg (0.03 Pounds) |
| Width | 0 cm (0 Inches) |
| Part Number | Cuifatiwc923s4fh8 |
8. MEIRIYFA
SATA Interface Power Supply, MEIRIYFA Chassis Fan Hub 3 Pin 4 Pin PWM PC CPU Cooling Fan Hub, 8 Way 12 V Cooling Fan Splitter Controller Hub
MEIRIYFA - Chassis fan hub - in the hub interfaces, the remaining 2-8 fan interfaces have the PWM function, the RED CPU interface is the CPU fan dedicated interface with speed detection function. It provide a better power supply solution for PC computer case internal motherboard cooling fans.
Easy to install - there is eva double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also 3 fixing screw hole in the PCB to facilitate fixing to a part of the chassis. Power supply - it can be directly powered by the power supply, the dual SATA interface is connected to the power supply, and all fans are powered through the SATA interface.
Equipped with a 2pin to 4pin pwm fan control cable: 2pin is terminated to the controller 2-pin socket, and 4Pin is terminated to the CPU PWM 4-pin fan socket of the computer motherboard.
Designed for 12v 4-pin 3-Pin fans, support simultaneous starting at most 8 channel fans. The chassis fan hub expand fan interfaces - expand 4-pin 3-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Other accessories - equipped with 8pcs self-locking nylon cable ties, you can use to fix the PCB and organize the bundled and installed fan lines. Since the mainboard can only receive one rotation speed signal, but no speed signal.
| Brand | MEIRIYFA |
| Manufacturer | Shenzhen Mili Dianzi |
| Height | 1 cm (0.39 Inches) |
| Length | 10 cm (3.94 Inches) |
| Width | 4 cm (1.57 Inches) |
| Part Number | PWM PC CPU Cooling Fan Hub |
9. Rabi
PC CPU Cooling 4 PIN/3PIN Fan Power Cable Hub Splitter Adapter Sleeved PWM Case Fan Splitter for 12V Desktop Computer Cooler Case Fans 15 Inch 4 Way, Rabi PWM Fan Hub
Rabi - Exwin pwm fan splitter allows you connect 4 PWM devices on a single motherboard. 4 way splitter, one for 12V CPU fan and three hub for general case fans. Please check your devices specification before installation.
Multiple fan splitter, supports all 12V CPU or case fans compatible with 4 pin or 3 pin connector. Note: do not exceed 12v 2a total output. A adhesive tape included to mount the hub on your computer case, the tape may not firmly attached on some textured surface.
| Brand | Rabi |
| Manufacturer | HBK |
| Part Number | PWM1-4/5 |
| Model | . |
10. SinLoon
SinLoon 4 Knob Cooling Fan Speed Controller PC 8 Channels Fan Hub for CPU Case HDD VGA PWM Fan PCI Bracket 12V Fan Control Power Supply SATA/4Pin Interface
SinLoon - 4pin fan hub the speed is infinitely variable from 0-12V in the full range. Save spacesinloon pc 8 channels fan hub the governor is installed in the PCI position of the chassis, External knob, which is convenient for installation and does not take up space, speed regulation is more convenient.
8-port fan speed controllersata power supply, multi-channel adjustable, up to 8 fans can be connected 1 knob to control 2 fans, the wind speed can be adjusted as needed.
High-quality material4 knob cooling Fan Speed Controller adopts plastic and metal materials, durable, reliable, with low loss and low heat.
If the fan and the light are integrated, the brightness of the light will also change when the speed is adjusted. Please notethe governor has a power limit, a single port can support a maximum current of 07a, it cannot be used beyond the standard, and a single fan with a power exceeding 10W cannot be connected, otherwise the product will be easily damaged.
| Brand | SinLoon |
| Manufacturer | mandyyan |
| Height | 1 cm (0.39 Inches) |
| Length | 5 cm (1.97 Inches) |
| Width | 3 cm (1.18 Inches) |
| Part Number | SL2022052101 |
ThreeBulls - Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy. Excellent 4-pin pwm 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.
Siganorpy - Red is expected to be a pass through for the cpu fan. Please note 4pin fan speed can be adjusted by temperature control. For both 4-pin and 3-pin fans. In the hub interfaces, the remaining nine conventional fan interfaces have the PWM function, the RED CPU interface is the CPU fan dedicated interface with speed detection function.
One enjoy - Only the speed of the red port can be identified by the system. Stable sata power input: simple and stable. Only one saTA connection to the system. Pwm function: each port has its own pwm function and the fan speed can be adjusted at the same time. Compact design can save space and make the wire more tidy. Easy to install: double-sided adhesive for easy installation and more stable standing in the surface. 10-port fan hub: supports 10 pwm 4 pin fans at the same time.
GeekerChip - Compatibility: fan hub 4 pin compatible with all 12V CPU and case fans with 4 pin or 3 pin connector. Note: don’t exceed 12v 2a total output. Design: designed for the need to control many system fans. Function: black 6 way PWM Splitter for Computer Fans. Please check your devices specification before installation. Convenience:1 female 4-pin connector + 6 Male 4-pin Connectors1 for 12V CPU and 5 for case fans.
ShiSheng - The compact reinforcement can effectively save your space, has super adhesion, connect the fan cable to the 3 Pin cooling fan hub to help you manage the cables to the maximum and keep the chassis tidy. Easy to usethe 8 way cooling fan hub splitter is very easy to install. Safety materialthe 8 way motherboard fan splitter is made of high-quality PVC material, and corrosion resistance.
GeekerChip - Note: don’t exceed 12v 2a total output. Function: black 6 way PWM Splitter for Computer Fans. Please check your devices specification before installation. Design: designed for the need to control many system fans. Compatibility: fan hub 4 pin compatible with all 12V CPU and case fans with 4 pin or 3 pin connector. Convenience:1 female 4-pin connector + 6 Male 4-pin Connectors1 for 12V CPU and 5 for case fans.
Cuifati - Black sleeved 4 way PWM splitter hub for computer fans. Designed for the need to control numerous system fans. Support pwm function, Speed control, satisfy your control needs. Capable of expanding one motherboard PWM fan header to support up to four fans. Compatible with 3-pin / 4-pin Fans.
MEIRIYFA - Chassis fan hub - in the hub interfaces, the remaining 2-8 fan interfaces have the PWM function, the RED CPU interface is the CPU fan dedicated interface with speed detection function. It provide a better power supply solution for PC computer case internal motherboard cooling fans.
Rabi - Exwin pwm fan splitter allows you connect 4 PWM devices on a single motherboard. 4 way splitter, one for 12V CPU fan and three hub for general case fans. Please check your devices specification before installation. Multiple fan splitter, supports all 12V CPU or case fans compatible with 4 pin or 3 pin connector. Note: do not exceed 12v 2a total output. A adhesive tape included to mount the hub on your computer case, the tape may not firmly attached on some textured surface.
SinLoon - 4pin fan hub the speed is infinitely variable from 0-12V in the full range. Save spacesinloon pc 8 channels fan hub the governor is installed in the PCI position of the chassis, External knob, which is convenient for installation and does not take up space, speed regulation is more convenient.
