As an Amazon Associate I earn from qualifying purchases.1. Lms Data
LMS Data 15U Deep Data Cabinet, Wall Mounted, 19-Inch Rackmount W550m x D450mm, Front/Rear Profiles, IT Data Network Equipment with Cable Management & Lock., Mount Rack, Multi-functional Wall Enclosures Cabinet for SMA Applications
Lms Data - Maximum safety ↪ attractive design lockable safety glass door. Quality made for you ↪ robust powder-coated, black detailing and quality alloy assembly means its IDEAL for a whole host of DATA VoIP and CCTV installations.
Easy-mount wall attachment bar. Complete structure ↪ introducing the new c-series range of 550mm deep wall enclosures, ETSI 19” front/rear profiles, 500X500X370mm WxDxH.
Also reversible if required. Convenience & space-saving design ↪ lms data 9u cabinet is a pre-built wall cabinet, Wall mountable with removable side panels and cable tunnels for maximum space usage. Opening the door 180 degrees. Simplicity, easy-to-install ↪ wall deployment & pre-built. Supplied with fixed shelf and bag of M6 fixings.
2. I-CHOOSE LIMITED
Depth 600mm, External Height 618mm, 12U 600mm Deep Wall Mounted or Floor Standing Rack Network Comms Cabinet | Lockable Front & Side Doors | Top, Bottom & Rear Cable Entries | Width 530mm
I-CHOOSE LIMITED - Please notebrush top, brush backs and the 4-Set of Castors must be purchased seperately and are not included with the racks. The size of the knockouts have been designed to enable a CAT5e or CAT6 patch panel removed from another device to be pulled through, saving the re-punching of the cables back in again.
The top mounted surface 5mm deep brush plate has been designed with the back edge open so that it can be attached after the cables have been pulled through the knockout. Brush platesno more gaping holes! and no more ingress of dust. There are six models available in 9U, 12 and 15U and either 450 or 600mm depth.
The 9u has one rear knockout in the centre and the 12 and 15U both have two rear knockouts near the top and bottom. The back-mount surface brush plate incorporates a smooth ledge so that the cables are not resting on the actual cabinet edge, reducing possible damage to the cabling when floor mounting, hence the 10mm depth of the plate.
An economic solution for a floor mount cabinet. Wall mounting or floor standingre-calibrated for strength, the floor section has been made suitable to accept four castors along with a range of accessories that are specially designed to accommodate both wall and floor scenarios. Convertible conviniencethe convicab concept is, in a nutshell, ‘convertible convenience’. Knockoutsall convicabs have knockouts on the top, bottom and rear. Standard wall mounted cabinets have been re-engineered for quick conversion to a floor standing version, when/if required.
3. Jeanoko
CAT5E 12Port Cable Rack Reliable Data Patch Panel Wall Mount Surface Network Cable Rack Patch Panels Wall-Mountable Rack for Network Wiring
Jeanoko - We believe that because of the performance the wall-mountable rack will be definitely your best choice. Polycarbonate: the shell material of the 12port cable rack is polycarbonate, which is flame-retardant to ensure the performance of the 12port cable rack extremely stable and reliable that can meet your needs greatly.
2. 5mΩ: the contact resistance of the data patch panel is under normal atmospheric pressure which does not exceed 2.
5mΩ. 8-pin pin contact: the cat5e wall-mountable rack adopts the 8-pin pin contact material which is plated with 3um gold, and the number of insertions and withdrawals is not less than 800 times.
And we are sure that the feature of the data patch panel will draw your attention. Stable performance: the cat5e wall-mountable rack adopts the standard T568A and T568B wiring which has good performance and high reliability. Ppo+pc injection: the data patch panel adopts ppO + PC injection molding, which is in line with practical international standards, and this design can make you feel assured of the product.
Brand | Jeanoko |
Manufacturer | Jeanoko |
Height | 1 cm (0.39 Inches) |
Length | 1 cm (0.39 Inches) |
Weight | 0.35 kg (0.77 Pounds) |
Width | 1 cm (0.39 Inches) |
Part Number | Jeanokovc0e9dr68i274 |
4. I-CHOOSE LIMITED
External Height 751mm, Bottom & Rear Cable Entries | Width 530mm, Depth 450mm, 15U 450mm Deep Wall Mounted or Floor Standing Rack Network Comms Cabinet | Lockable Front & Side Doors | Top
I-CHOOSE LIMITED - There are six models available in 9U, 12 and 15U and either 450 or 600mm depth. Please notebrush top, brush backs and the 4-Set of Castors must be purchased seperately and are not included with the racks. Brush platesno more gaping holes! and no more ingress of dust. The top mounted surface 5mm deep brush plate has been designed with the back edge open so that it can be attached after the cables have been pulled through the knockout.
Standard wall mounted cabinets have been re-engineered for quick conversion to a floor standing version, in a nutshell, when/if required. Wall mounting or floor standingre-calibrated for strength, the floor section has been made suitable to accept four castors along with a range of accessories that are specially designed to accommodate both wall and floor scenarios.
Knockoutsall convicabs have knockouts on the top, bottom and rear. The 9u has one rear knockout in the centre and the 12 and 15U both have two rear knockouts near the top and bottom.
The size of the knockouts have been designed to enable a CAT5e or CAT6 patch panel removed from another device to be pulled through, saving the re-punching of the cables back in again. An economic solution for a floor mount cabinet. The back-mount surface brush plate incorporates a smooth ledge so that the cables are not resting on the actual cabinet edge, reducing possible damage to the cabling when floor mounting, hence the 10mm depth of the plate. Convertible conviniencethe convicab concept is, ‘convertible convenience’.
5. I-CHOOSE LIMITED
Bottom & Rear Cable Entries | Width 530mm, Depth 600mm, 9U 600mm Deep Wall Mounted or Floor Standing Rack Network Comms Cabinet | Lockable Front & Side Doors | Top, External Height 485mm
I-CHOOSE LIMITED - The top mounted surface 5mm deep brush plate has been designed with the back edge open so that it can be attached after the cables have been pulled through the knockout. Brush platesno more gaping holes! and no more ingress of dust. The 9u has one rear knockout in the centre and the 12 and 15U both have two rear knockouts near the top and bottom.
Knockoutsall convicabs have knockouts on the top, bottom and rear. Please notebrush top, brush backs and the 4-Set of Castors must be purchased seperately and are not included with the racks. An economic solution for a floor mount cabinet. There are six models available in 9U, 12 and 15U and either 450 or 600mm depth.
Standard wall mounted cabinets have been re-engineered for quick conversion to a floor standing version, in a nutshell, when/if required. Wall mounting or floor standingre-calibrated for strength, the floor section has been made suitable to accept four castors along with a range of accessories that are specially designed to accommodate both wall and floor scenarios.
The size of the knockouts have been designed to enable a CAT5e or CAT6 patch panel removed from another device to be pulled through, saving the re-punching of the cables back in again. The back-mount surface brush plate incorporates a smooth ledge so that the cables are not resting on the actual cabinet edge, reducing possible damage to the cabling when floor mounting, hence the 10mm depth of the plate. Convertible conviniencethe convicab concept is, ‘convertible convenience’.
6. Dynamode
Wall Mounted, Multi-functional Wall Enclosures Cabinet for SMA Applications, LMS Data FLATPACK 6U 450mm Deep Data Cabinet, IT Data Network Equipment with Cable Management & Lock., 19" Rackmount 600x450x460mm , Mount Rack
Dynamode - Complete structure ↪ introducing the new c-series range of 450mm deep wall enclosures, ETSI 19” front/rear profiles, 600x450x460mm WxDxH. Maximum safety ↪ attractive design lockable safety glass door.
Quality made for you ↪ robust powder-coated, gray detailing and quality alloy assembly means its IDEAL for a whole host of DATA VoIP and CCTV installations. Also reversible if required.
Simplicity, easy-to-install ↪ wall deployment & pre-built. Convenience & space-saving design ↪ lms data 6u cabinet is a pre-built wall cabinet, Wall mountable with removable side panels and cable tunnels for maximum space usage. Supplied with fixed shelf and bag of M6 fixings. Easy-mount wall attachment bar. Opening the door 180 degrees.
Brand | Dynamode |
Manufacturer | Dynamode |
Height | 17 cm (6.69 Inches) |
Length | 49 cm (19.29 Inches) |
Width | 63 cm (24.8 Inches) |
Part Number | CAB-WFP-FE |
Model | DYNA-CAB-WFP-FE-6U450 |
Warranty | 1 Year |
7. Lms Data
Front/Rear Profiles, LMS Data 9U 450mm Deep Data Cabinet, Mount Rack, IT Data Network Equipment with Cable Management & Lock. Free Bonus Fitted Vented Shelf For Your Equipment., Multi-functional Wall Enclosures Cabinet for SMA Applications, Wall Mounted, 19-Inch Rackmount W550m x D450mm
Lms Data - Complete structure ↪ introducing the new c-series range of 550mm deep wall enclosures, ETSI 19” front/rear profiles, 550x450x460mm WxDxH. Free bonus accessory Fitted Vented Shelf For Your Equipment.
Easy-mount wall attachment bar. Maximum safety ↪ attractive design lockable safety glass door. Opening the door 180 degrees. Also reversible if required. Supplied with fixed shelf and bag of M6 fixings.
Quality made for you ↪ robust powder-coated, black detailing and quality alloy assembly means its IDEAL for a whole host of DATA VoIP and CCTV installations. Convenience & space-saving design ↪ lms data 9u cabinet is a pre-built wall cabinet, Wall mountable with removable side panels and cable tunnels for maximum space usage. Simplicity, easy-to-install ↪ wall deployment & pre-built.
Brand | Lms Data |
Manufacturer | Dynamode |
Height | 46 cm (18.11 Inches) |
Length | 45.01 cm (17.72 Inches) |
Weight | 34000 |
Width | 54.99 cm (21.65 Inches) |
Part Number | CAB-W9U-EL450 |
Model | DYNA-CAB-W9U-EL450 |
8. AYNEFY
AYNEFY Data Patch Panel, 483 x 42 x 35 mm / 19 x 1.7 x 1.4 inches, LAN Network Adapter CAT6 24 Port Patch Panel Rack Cable Wall Mounted Bracket Rack Tool for Home or Office
AYNEFY - High speed transmission High speed transmission, can maximize the transmission speed of CAT6 cable in your network. 24 port 24 port ensure good contacts and suitability, and extend connections as many as possible. Safe to use safe to use, high precision metal allows stable performance and effectively prevent electromagnetic interference.
Save space space saving, keep the multiple network cables in perfect order, and make your home or office clean and organized. Mountable cat6 patch panel a mountable CAT6 patch panel which provides a great solution for network and cable management.
Brand | AYNEFY |
Manufacturer | AYNEFY |
Height | 6 cm (2.36 Inches) |
Length | 48 cm (18.9 Inches) |
Weight | 0.65 kg (1.43 Pounds) |
Width | 10 cm (3.94 Inches) |
Part Number | AYNEFY dwg3z5gy4h888 |
9. LMS DATA
IT Data Network Equipment with Cable Management & Lock., LMS Data 9U 550mm Deep Data Cabinet, Multi-functional Wall Enclosures Cabinet for SMA Applications, Wall Mounted, Mount Rack, 19" Rackmount 550x550x460mm
LMS DATA - Quality made for you ↪ robust powder-coated, black detailing and quality alloy assembly means its IDEAL for a whole host of DATA VoIP and CCTV installations.
Simplicity, easy-to-install ↪ wall deployment & pre-built. Convenience & space-saving design ↪ lms data 9u cabinet is a pre-built wall cabinet, Wall mountable with removable side panels and cable tunnels for maximum space usage.
Complete structure ↪ introducing the new c-series range of 550mm deep wall enclosures, ETSI 19” front/rear profiles, 550 x 550 x 460mm WxDxH. Also reversible if required. Supplied with fixed shelf and bag of M6 fixings. Maximum safety ↪ attractive design lockable safety glass door. Opening the door 180 degrees. Easy-mount wall attachment bar.
Brand | LMS DATA |
Manufacturer | Dynamode |
Height | 46 cm (18.11 Inches) |
Length | 55 cm (21.65 Inches) |
Weight | 16 kg (35.27 Pounds) |
Width | 55 cm (21.65 Inches) |
Part Number | DYNA-CAB-W9U-EL550 |
Model | DYNA-CAB-W9U-EL550 |
10. Facibom
Facibom UTP 24 Port Rj45 Patch Panel Rack Cable Wall Mounted Bracket Rack Tool Ethernet Lan Network CAT6
Facibom - Contact resistance: no more than 2. 5mΩ under normal atmospheric conditions. 24 port cat6 network distribution frame. Insulation resistance: not less than 1000MΩ under normal atmospheric pressure.
Terminal material: phosphor bronze plating nickel, the number of insertions and removals is not less than 300 times. Eight-needle material: phosphor bronze bronzed, the number of insertions and removals is not less than 800 times.